Gigaset N610 IP PRO Instruction Manual page 41

Group pick-up
Not available when the device is in All in one + internal telephony - dynamic IP
mode.
Group pick-up enables a user to accept a call for another subscriber, e.g., a pick-up group. Users
belonging to the same call pick-up group can accept all calls for the group. A pick-up group must
be established during SIP account registration. The call number or the SIP URI of a pick-up group
can be assigned to the mobile device.
Enter the Call number or SIP name (URI) of the pick-up group.
Activate the function via the check box.
Call manager
Not available when the device is in All in one + internal telephony - dynamic IP
mode.
From the Accept calls directly via Call Manager option menu select, whether calls that are
initialised by a PBX call manager are to be accepted directly:
via Headset
via Handsfree
No
Direct call acceptance requires a secured signalling to the PBX (TLS).
Accepting calls via a Call Manager has no impact on the DECT system performance,
because it is handled on SIP level.
Missed calls and alarms
You can define if missed and accepted calls should be counted and if new messages of specific
types should be indicated via the MWI LED on the handset's message key.
Select Yes/No next to Missed calls count/Accepted calls count, to activate/deactivate the
call counter for missed and accepted calls. The information is displayed in the handset's call
lists, missed calls are also shown on the handset's idle display.
Select Yes/No next to the message type (missed calls, missed alarms, new message on the
network mailbox), to activate/deactivate the MWI LED for the message type.
If Yes is selected, the message key will flash, if a new message of the selected types is
received.
To accept the call the handset automatically activates the connected
headset.
To accept the call the handset automatically activates the speaker phone
function.
The call is not accepted automatically at all.
Mobile devices
41