Start Playback - Sony SRS-XB32 Help Manual

Start playback.

3
1.
Start playback on the connected BLUETOOTH device and adjust the volume.
The same music is played from all speakers.
When adjusting the volume on the BLUETOOTH device or the speaker connected with the device (the speaker
set up as the first one), the volumes of all speakers are automatically adjusted. For other speakers (the second
or later speaker set), you can also adjust the volume on each other.
Hint
You can also operate the Wireless Party Chain function on "Sony | Music Center."
What you can do with the Wireless Party Chain function depends on the speakers you connect.
When using the Wireless Party Chain function, the codec automatically switches to SBC.
Note
When watching movies using the Wireless Party Chain function, there may be a gap between video and audio.
When the speaker is in the AUDIO IN mode, you cannot use the Wireless Party Chain function.
Be sure to close the cap completely after using the WPC (Wireless Party Chain) button.
Related Topic
What you can do with "Sony | Music Center"
5-001-234-11(1) Copyright 2019 Sony Corporation
54