Starting Operation; Mounting And Operation - Bosch EasyMower 18V-32-150 Manual

Table of Contents

Advertisement

Lawnmower
Recommended ambient temperature
during charging
Permitted ambient temperature during
B)
operation
and storage
Battery type
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Typically the A-weighted noise levels of the product are:
Noise emission values determined according to EN IEC 62841-4-3:2021
– Sound pressure level
– Uncertainty K
– Sound power level
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN IEC 62841-4-3:2021
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method and may be used for comparing
one machine with another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the machine can differ from the declared total value depend-
ing on the ways in which the machine is used; and of the
need to identify safety measures to protect the operator that
are based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating cycle
such as the times when the machine is switched off and
when it is running idle in addition to the trigger time).

Mounting and Operation

To provide for proper cutting performance, set the height
u
of cut to the same position on all 4 wheels (see figure E).
Action
A)
Delivery scope
Mounting the handle
Snapping together the grassbox
Fitting/removing the grassbox
Setting the height of cut
Inserting the battery
Operation
- Inserting the isolator switch
- Switching on
Bosch Power Tools
EasyMower 18V-32-150
°C
°C
3.0 Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah
EasyMower 18V-32-150
dB(A)
dB
dB(A)
2
m/s
2
m/s
Action
- Mowing
- Switching off
- Removing the isolator switch
Removing the battery
Working advice "mowing"
Blade maintenance/Blade replacement
Selecting accessories
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Starting Operation

For Your Safety
Warning! Switch off, remove the isolator switch and
u
the battery before adjusting or cleaning. The same ap-
plies when the cable to the switch in the handle is
damaged, cut or entangled.
Figure
Page
The blade continues to rotate for a few seconds after
u
A
11
the machine is switched off.
B
12
Caution: Do not touch the rotating blade.
u
C
13
Use only the chargers listed in the technical data. Only
u
D
13
these chargers are matched to the lithium-ion batteries of
your product.
E
14
14
F
Charging the Battery
G − H
15 −
The battery is equipped with temperature monitoring that al-
16
lows charging only in the temperature range between 0 °C
EasyMower 18V-32-200
0... +35
-20... +50
PBA 18V...W-.
3.0 Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah
EasyMower 18V-32-200
75
= 2.5
88
< 2.5
1.5
Figure
F 016 L94 617 | (14.02.2023)
English | 7
0... +35
-20... +50
PBA 18V...W-.
75
= 2.5
88
< 2.5
1.5
Page
I
17
J
17
K
18
L
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easymower 18v-32-200

Table of Contents