Storage Features - Frigidaire FPRU19F8WF2 Use & Care Manual

Full Width Cantilever Shelves
Multi-position adjustable glass shelves
can be moved to any position for larger
or smaller packages. The shipping spacers
that stabilize the shelves for shipping may
be removed and discarded.
To Adjust The Shelves
• Remove all food from the shelf.
• Shelves are heavy. We recommend
using 2 hands to install and remove
the shelf. We recommend placing 1
hand centered on the front trim and
the other hand centered under the
rear of the shelf.
• Lift the front edge up at a slight
angle to release the tabs from the
slots in the rear. Continue lifting the
shelf vertically until the shelf clears
the built-in shelf supports located on
the sides of the cabinet. Then pull the
shelf out.
• Replace the shelf by inserting the
mounting bracket hooks into the
desired support slots at the rear.
• Carefully lower the shelf and lock it
into position.
IMPORTANT
Carefully handle the shelves when
removing and installing them to prevent
making contact with the cabinet liners
and the stainless steel rear air tower.
Do not block the air-flow vents located
on the back wall of the air-tower with
the shelves.

STORAGE FEATURES

Slide-Out Shelf
The slide-out shelf can hold many
different containers and food types for
your convenience.
We recommend opening and closing the
slide-out shelf by grabbing the shelf with
a single hand in the middle of the shelf
handle.
To remove the slide- out shelf:
1. Remove all items from the shelf.
2. We recommend using 2 hands to
remove and install the shelf from
the slide rail supports. Remove the
shelf by pulling it out until it is fully
extended. Lift up on the front of the
handle area and lift it out.
3. Carefully handle the shelf to prevent
making contact with the cabinet
liner during removal and installation.
23