Korg EK-50L Owner's Manual page 20

20
Song mode
Overlaying parts when recording (overdubbing
function)
You can overlay parts that you play using the keyboard part
when recording a user song. You can also record changes in the
sounds used for the keyboard and accompaniment parts.
1.
Select a user song.
2.
Press the start/stop button to play back the song.
3.
Press the record button (the button will light up red).
4.
Play the keyboard and make changes to the sounds.
y To change the sounds of a part, press the PART button
while holding down the [SHIFT] button, and use the dial
or other means to select a sound.
When you change the sound, that information is recorded in
the part.
Note:
During overdubbing, you can mute or unmute the
keyboard part, but this will not be recorded.
Note:
To record changes to the sound, make the changes
while the part is unmuted. Changes to a sound can be made
to any part besides the other parts. The changes you make to
a sound, as well as your keyboard playing will be recorded
while the part is unmuted.
5.
Press the record button when you are finished
overdubbing (the button will go dark).
Note:
To overdub again, press the start/stop button to stop
playback, and follow the steps from step 2 on.
y To check the song that you have overdubbed your playing
on, press the start/stop button and then unmute the part
you overdubbed.
Overdubbing
Rec Start
↓
Upper 1 Overdubbing
Upper 2 Overdubbing
Upper 3 Overdubbing
Lower Overdubbing
Part
Bass
Drum
Percussion
Other Parts
Song Play
↓
Upper 1
Upper 2
Upper 3
Lower
Part
Bass
Drum
Percussion
Other Parts
2
Rec Stop
↓
MIDI ch 1
MIDI ch 2
MIDI ch 3
MIDI ch 4
MIDI ch 9
MIDI ch 10
MIDI ch 11
MIDI ch 12-16
Rec Start Rec Stop
↓ ↓
Overdubbing MIDI ch 1
Overdubbing MIDI ch 2
Overdubbing MIDI ch 3
Overdubbing MIDI ch 4
MIDI ch 9
MIDI ch 10
MIDI ch 11
MIDI ch 12-16
Deleting a user song
This will delete a user song that you have selected.
1.
Select a user song.
2.
Press the ERASE button.
"Delete? No" will appear on the display.
3,5
3.
Turn the dial to select "Yes".
4.
Press the ERASE button.
The user song will be deleted, and the display will show
"Completed".
3
2,4