Digital Zoom - Panasonic Viera TH-32LHD7 Operating Instructions Manual

Digital Zoom

This displays an enlargement of the designated part of the displayed image.
1
Display the "Operation Guide".
ZOOM
MOVE
During Digital Zoom, only the following buttons can be operated.
[Remote control]
2
Select the area of the image to be enlarged.
3
Select the magnifi cation required for the enlarged display.
4
Return to normal display (quit Digital Zoom).
R
Notes:
• When power goes OFF (including "Off Timer" operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
"Multi-viewer" (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 20)
• While Digital Zoom is in operation, "Adjusting PICTURE POSITION/SIZE" cannot be used.
• The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
• The Digital Zoom capability is functional for the following composite signals:
NTSC, PAL, SECAM
24
Press to access Digital Zoom.
The "Operation Guide" will be displayed.
SURROUND button
INPUT
MUTE button
SURROUND
VOL
N R
VOL button
PICTURE SOUND SET UP
MULTI ZOOM
PIP SWAP SELECT MOVE
PICTURE
POS. /SIZE ASPECT
OFF TIMER button
PC OFF TIMER
Press on the enlargement location to select.
The cursor will move.
Each time this is pressed, the magnifi cation factor changes.
This is shown in the image being displayed.
Press to exit from the Digital Zoom.
[Unit]
INPUT MENU -/ VOL
VOL button
× 1 × 2
EXIT
1
+
/ ENTER/
EXIT
2
× 3 × 4