Adjusting Picture Position / Size - Panasonic Viera TH-32LHD7 Operating Instructions Manual

Adjusting PICTURE POSITION / SIZE

PICTURE
1
POS. /SIZE
2
3
R
4
Notes:
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080)
/ 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for
each frequency.)
• If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be
controlled by the PICTURE POS. / SIZE function.
• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
Adjust the horizontal position.
H-POS
Adjust the vertical position.
V-POS
CLOCK PHASE
(RGB/PC in mode)
N
Helpful Hint (
While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or
the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
Press to display the PICTURE POS. /SIZE menu.
Press to select H-POS / H-SIZE / V-POS / V-SIZE /
CLOCK PHASE.
Press to adjust POS. / SIZE.
Press to exit from adjust mode.
Eliminate the fl ickering and distortion.
/ Normalization)
NORMALIZE
Adjust the horizontal size.
H-SIZE
Adjust the vertical size.
V-SIZE
SURROUND
N
PICTURE SOUND
MULTI
SWAP SELECT
PIP
PICTURE
POS. /SIZE
PC
D u r i n g " V I D E O ( S V I D E O ) " ,
"COMPONENT" and "DVI" input signal.
PICTURE POS. /SIZE
NORMALIZE
NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
During "RGB / PC" input signal.
PICTURE POS. /SIZE
NORMALIZE NORMAL
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
INPUT
VOL
R
SET UP
ZOOM
MOVE
ASPECT
OFF TIMER
19