Attaching The Camera To A Tripod - Sony VAIO PCGA-UCVC11 Operating Instructions Manual

Attaching the camera to a tripod

Downloaded from:
You can attach the camera to a tripod to capture images.
Notes
• Do not walk around with the camera when it is attached to the tripod. If
the camera falls, it could be damaged.
• Do not use a tripod with a screw that exceeds 0.28 inches (7 mm) in
length. If you use a tripod with a screw longer than 0.28 inches (7 mm) in
length, the camera will not be stable when it is attached, and it may be
damaged.
• When attaching the camera, first make sure that the tripod is stable, then
attach the camera so that it is horizontal. If the camera is tilted, it could
fall.
• When adjusting the position of the camera, protect it from falling by
supporting both the tripod handle and the camera with your hands.
• When adjusting the camera angle, focus, or positioning of the USB cable,
make sure you support the camera with your hand.
• When operating the capture button on the camera, make sure you support
the camera with your hand.
• Make sure you use a tripod that is big enough to support the weight of the
camera without tipping.
1
Attach the tripod screw hole on the mounting adapter to the
tripod screw.
2
Attach the camera to the mounting adapter.
3
Connect the camera USB cable to the computers USB
connector.
Refer to the manuals provided with your computer to locate the
position of the USB connector on your computer.
https://www.usersmanualguide.com/
Tripod screw
Continued on next page
GB
19