Maintenance And Servicing; Maintenance; Ioptron Customer Service; Product End Of Life Disposal Instructions - iOptron CEM70G Instruction Manual

6. Maintenance and Servicing

6.1. Maintenance

Do not overload the mount. Do not drop the mount as this will damage the mount and / or
permanently degrade GoTo performance and tracking accuracy. Use a wet cloth to clean the mount
and hand controller. Do not use solvent.
The mount worm/gear meshing can be adjusted to accommodate payload or temperature
changed. An instruction is listed in Appendix E.
The real time clock battery in the hand controller needs be replaced if it can't keep the time after
power off the mount.
If your mount is not to be used for an extended period, dismount the OTAs and
counterweight(s).

6.2. iOptron Customer Service

If you have any question concerning your CEM70 mount contact iOptron Customer Service
Department. Customer Service hours are from 9:00 AM to 5:00 PM, Eastern Time, Monday through
Friday. In the event that the CEM70 requires factory servicing or repairing, write or call iOptron
Customer Service Department first to receive a RMA# before returning the mount to the factory. Please
provide details as to the nature of the problem as well as your name, address, e-mail address,
purchase information and daytime telephone number. We have found that most problems can be
resolved by e-mails or telephone calls, so please contact iOptron first to avoid returning the mount for
repair.
It is strongly suggested that to send technical questions to support@ioptron.com. Call in the
U.S. 1.781.569.0200.

6.3. Product End of Life Disposal Instructions

This electronic product is subject to disposal and recycling regulations that vary by
country and region. It is your responsibility to recycle your electronic equipment per your
local environmental laws and regulations to ensure that it will be recycled in a manner
that protects human health and the environment. To find out where you can drop off your
waste equipment for recycling, please contact your local waste recycle/disposal service
or the product representative.

6.4. Battery Replacement and Disposal Instructions

Battery Disposal: Batteries contain chemicals that, if released, may affect the
environment and human health. Batteries should be collected separately for recycling,
and recycled at a local hazardous material disposal location adhering to your country and
local government regulations. To find out where you can drop off your waste battery for
recycling, please contact your local waste disposal service or the product representative.
32