Lenovo C27q-30 User Manual page 9

Hide thumbs Also See for C27q-30:
Table of Contents

Advertisement

1-4 C27q-30 Flat Panel Monitor User's Guide
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the
other end to the DP connector on the monitor. Lenovo recommends that customers who
require using the Display Port input on their monitor purchase the "Lenovo Display Port to
Display Port cable 0A36537".
For more information, go to the following:
www.lenovo.com/support/monitor accessories
4. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and/or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord according
to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm²) shall be used.

Advertisement

Table of Contents
loading

This manual is also suitable for:

63bdgat6uk

Table of Contents