Package Contents; Markings On Tool; Description (Fig. A) - DeWalt DCF680G2F-QW Manual

English
the latest regulations for packaging, labeling/marking and
documentation requirements.
The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer's responsibility to ensure that its
activities comply with the applicable regulations.
Storage Recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
L
pictographs:
Read instruction manual before use.
p
See Technical Data for charging time.
q
Do not probe with conductive objects.
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
8
WALT batteries with a D WALT
e
Battery Type
The following SKU(s) operate on a 7.2 volt battery pack:
DCF680, DCF682
These battery packs may be used: DCB080. Refer to Technical
Data for more information.

Package Contents

The package contains:
1 Cordless Screwdriver
1 Charger
1 Battery pack (G1 model)
2 Battery packs (G2 model)
1 Kitbag (G1 model)
1 Kitbox (G2 model)
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2020 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Motion control activation trigger
1
Lock off switch
2
LED worklight
3
Battery fuel gauge
4
Battery release button
5
Battery pack
6
Quick release chuck
7
Chuck collar
8
Torque adjustment collar (DCF680 Only)
9
Release button (DCF680 Only)
10
Intended Use
These screwdrivers have been designed for professional
screwdriving applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These screwdrivers are professional power tools.