Table of Contents
Advertisement
Temperature
11
touch button
On/Off push
12
button
Permanent Extra
Rinse
By means of Spin touch button, you can also set:
•
Drain Only
Activate the drain-only option (Skipping the wash, rinse
and spin phases):
The appliance performs the only draining phase of the selec‐
ted washing programme.
The display shows the indicator
(no spin) and the indicator
•
Spin Only
Activate the spin-only option (Skipping the wash and rinse
phases):
Before setting this option, select a suitable
washing programme for the garments. The ap‐
pliance will performs the most fitting spin cycle
for your garments care (e.g. For synthetics
items, first select the Synthetics washing pro‐
gramme and then the Spin Only option).
The appliance performs only the spinning phase of the selec‐
ted washing programme.
The display shows the indicator
tor
and the spin speed.
When you select a washing programme, the appliance automati‐
cally proposes a default temperature.
Touch this button repeatedly until the desired temperature value
appears on the display.
When the display shows the indicators
ance does not heat the water.
Pressing this button for a few seconds allows to activate or deacti‐
vate the appliance. Two different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically deacti‐
vates the appliance to decrease the energy con‐
sumption in a few cases, you may need to acti‐
vate the appliance again.
Refer to "Stand-by option" paragraph in "Daily
Use" chapter for more details.
With this option you can permanently have an extra rinse.
To activate/deactivate this option touch the Spin
the Intesive/Prewash
indicator
comes on/goes off over rinse phase symbol.
This option adds two rinses.
(cold), the indicator
.
(cold), the phase indica‐
and
button simultaneously, the relevant
ENGLISH
19
, the appli‐
button and
Advertisement
Table of Contents
