Install Chimney Covers; Complete Installation And Check Operation - KitchenAid KVWC958JSS Installation Instructions And Use & Care Manual

Install Chimney Covers

1. Install damper on top of the exhaust opening. Check that the
damper opens freely.
2. Connect the vent system and seal all connections with
clamps.
Install Upper Chimney Cover
1. Slightly spread the sides of the cover apart and hook them
behind the chimney mounting brackets.
2. Attach the cover to the brackets with 2 flat head screws.
3. Securely tighten screws.
A
A. 2 flat head screws
Install Lower Chimney Cover
1. Slightly spread the sides of the cover apart and hook them
behind the upper chimney.
2. From inside the range hood, use the 4 Phillips washer head
screws to attach the lower chimney cover to the canopy of
the range hood.
3. Securely tighten screws.
A. 4 washer head screws
14
A
A

Complete Installation and Check Operation

1. Install grease filters. See "Range Hood Care" section.
2. Check operation of the range hood blower and lights. See
"Range Hood Use" section.
G
F
A. LED lights
B. Blower control switches
C. LED light switch
3. If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power supply and check that the wiring is
correct.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
A
B
C
D
E
D. Heat lamp switch
E. Heat lamps
F. Grease filter
G. Grease filter handles