Maytag MGS8800FZ1 User Manual page 6

Keypad Feature
CONVECT Convection
cooking
KEEP WARM Hold warm
DELAY START Delayed start
COOK TIME Timed cooking
POWER Rapid oven
PREHEAT preheating
WARMING Warming drawer
DRAWER ON
(HI/MED/LO)/
OFF
AQUALIFT Clean cycle
SELF CLEAN
START (hold Oven control
3 sec to lock) lockout
SETTINGS/ Energy save
CLOCK
Instructions
1. Press CONVECT until the desired convection mode appears in the display.
2. Press START.
3. Press the number keypads to set the desired temperature.
4. Press START.
5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when finished.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using
the number keypads. The default temperature is 170°F (75°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may
not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set
length of time and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
Provides the fastest preheat time for the Bake function. Power Preheat is preset to OFF,
but it can be changed to ON.
1. Press POWER PREHEAT.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Power Preheat may be started directly by
pressing POWER PREHEAT.
1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for
the Medium setting or a third time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
See the "Warming Drawer" section for more information.
See the "Clean Cycle" section.
1. Check that the oven is OFF.
2. Press and hold START (hold 3 sec to lock) for 3 seconds.
3. A tone will sound, and "Control Locked" will scroll, and then "Locked" will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop
functions are not affected by the oven control lockout.
1. Press SETTINGS/CLOCK until "ENERGY SAVE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity.
Any keypad press will activate the display. If Energy Save is OFF, the display will be
on at all times.
6