Using The Light Off Function; Using The Mute Function - LG LW8017ERSM1 Owner's Manual

Wi-Fi (Wi-Fi Model Only)
5
Enables connection of the air conditioner to
the home Wi-Fi.
NOTE
• Follow instructions on ThinQ application
on how to connect to your unit.
Clean Filter
6
The Clean Filter LED lights up to notify you
that the filter needs to be cleaned. After
cleaning the filter, press Temp
together on the control panel, or press
Temp button on the remote control for 3
seconds to turn off the Clean Filter light.
NOTE
• This feature is a reminder to clean the
air filter for more efficient operation.
The LED light turns on after 250 hours
of operation.
Temperature Control
7
The thermostat monitors room
temperature to maintain the desired
temperature. The thermostat can be set
between 60 °F–86 °F (16 °C–30 °C).
Press or
decrease temperature setting.
Demand Response
8
The Demand Response LED lights up to
notify you that the appliance operates in
Demand Response mode, in other words,
DR mode. The Demand Response function
can control energy usage or delay the
operation of some functions to save energy
during peak usage periods.
NOTE
• DR Off (Override) - Press Timer button
and Fan Speed button together, or
press Fan Speed button on the remote
control for 3 seconds to override the
Demand Response (DR) function.
16
and
arrows to increase or
NOTE
• Auto Restart : If the air conditioner turns
off due to a power outage, it will restart
automatically once the power is restored, with
the same settings as were set before the unit
turned off.
• Energy Saver : The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
• The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
Using the Light Off
Function
You can set the brightness of the control panel,
• Press Timer button on the remote control for 3
seconds.
NOTE
• Turn on/off the control panel.
• If the brightness of an indoor appliance's
display is set to OFF, pressing a button on the
remote control automatically turns the display
on for 5 seconds.
• This function may operate differently,
depending on the model.

Using the Mute Function

You can turn on/off the unit's buzzer sound,
• Press Mode button on the remote control for 3
seconds.
EN