Table of Contents
Advertisement
MTS Broadcast / TV Stereo System
®
Equipped with
-TV Noise
Reduction for true MTS
®
reproduction.
-TV Noise
Reduction is required for good
stereo separation and audio fidelity.
®
is a registered trademark, and
®
is licensed by
Technology
Licensing.
< Example >
Press AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an "
" mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SAP
MONO
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SAP
MONO
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SAP
MONO
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SAP
MONO
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• "SAP" is selected with first press of AUDIO.
STOP
1 2 : 0 0AM
ABC
0 : 0 0 : 0 0
STEREO
SP
SAP
MONO
Press AUDIO
MTS Stereo and SAP broadcast
ABC
Multi-channel Television Sound Stereo
SP
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
ABC
Multi-channel Television Sound Stereo
SP
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possible improvement.
SAP broadcast
ABC
Secondary Audio Program
SP
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
ABC
Normal monaural sound broadcast.
SP
ABC
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
Press AUDIO
ABC
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
23
Advertisement
Table of Contents
