Inserting and removing the card
(optional)/the battery
Set the camera ON/OFF switch
to OFF and slide the release
lever (
opening the lid
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert all the way firmly until
• Card: Insert all the way firmly until it
clicks.
Close lid
Slide to the [LOCK] position.
■
To remove
• To remove battery:
move lever in direction of arrow.
●
Always use genuine Panasonic batteries (DMW-BCG10PP).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
Insert the card fully, otherwise it may be damaged.
12
VQT3H25 (ENG)
) to [OPEN] before
a locking sound is heard, and
check that the lever is hooked
over the battery.
Lever
[OPEN] [LOCK]
• To remove card:
press down in center.