Panasonic Lumix DMC-TS3 Owner's Manual page 52

[VIERA Link]
•
This will work when the HDMI micro cable (optional) is connected.
•
Refer to P142 for details.
[3D Playback]
•
This will work when the
•
Refer to P144 for the method to playback 3D pictures in 3D.
M [Rotate Disp.]
•
Refer to P34 for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
[Version Disp.]
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI micro cable (optional).
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
[OFF]: Operation is performed with the buttons on this unit.
Setup the output method for 3D pictures.
[ ]: Set when connecting to a 3D compatible television.
[ ]: Set when connecting to a television not compatible
with 3D.
Set this when you would like to view pictures in 2D
(conventional image) on a 3D compatible television.
HDMI cable (optional)
micro
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically. (Playback Mode only)
[ ]:
[ ]:
[OFF]
It is possible to check which version of firmware is on the camera.
- 52 -
Basic
is connected.
It will rotate and display vertically.
It will display vertically only when playing
back connected to a TV.