Single Picture - Panasonic Lumix DMC-LZ3 Operating Instructions Manual

• Connect the USB connection cable with
the [ ] mark facing the [1] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at C
and insert straight in or take straight
out.
3 Press 4 to select [PictBridge
(PTP)] and then press
[MENU/SET].
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
SELECT
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a PC. (P23)
• Do not use any other USB connection
cables except the supplied one.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can edit
or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want
to switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the printer again.
• To print the age in [BABY1]/[BABY2]
(P54) in scene mode, use the software
[LUMIX Simple Viewer] in the CD-ROM
(supplied) and print from the PC. For
information about this, refer to the
separate operating instructions for PC
connection.
MENU
SET
MENU
SET
• To find out more about PictBridge
compliant printers, contact your local
dealer.

∫ Single picture

1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SINGLE PICTURE
DPOF PICTURE
SELECT
2 Press 2/1 to select the picture
and then press 4.
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
∫ Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step 3.
Connecting to other equipment
MENU
SET
MENU
SET
100 _ 0001
1/3
EXIT MENU
１秒
1 OFF
MENU
SET
MENU
SELECT SET
VQT0U87
83