DeWalt DWFP12233-CA Instruction Manual page 11

FIG. 4
Depth Setting (Fig. 1)
WARNING: Disconnect air line from tool and remove fasteners
from magazine before making adjustments or personal injury may
result.
The fastener depth control adjustment feature provides close
control of the fastener drive depth from flush with or just above the
work surface to shallow or deep countersink.
Rotate depth control adjustment wheel (K) to give the desired depth
of drive.
Belt Hook (Fig. 1, 5)
The belt hook (J) can be changed to either side of the tool to
accommodate left- or right-handed users.
INSTALLING THE BELT HOOK
WARNING: Disconnect air line from tool and remove fasteners
from magazine before making adjustments or before attempting any
assembly or disassembly.
WARNING: Always remove the belt hook from the tool when
selecting Contact Trip Mode.
1. Assure that the sequential trip mode is selected
2. Align belt hook with slot in bracket.
3. Slide belt hook into bracket slot.
4. Slide until belt hook snaps into place.
FIG. 5
J
Using The Integrated Pencil Sharpener (Fig. 6)
A standard pencil sharpener (L) is integrated into the belt hook for
the operator's convenience. To sharpen a pencil, insert any standard
pencil into the hole and rotate the pencil to the right (clockwise) to
sharpen.
FIG. 6
L
9