Setting The Date/Time (Clock Set) - Panasonic Lumix DMC-LC43 Operating Instructions Manual

Setting the Date/Time (Clock Set)

7
3
REC
BEEP
NO.RESET
RESET
CLOCK SET
SELECT SET
4,5
CLOCK SET
10 : 00 NOV . 1
M/D/Y
SELECT SET
Preparation
If the message [PLEASE SET THE CLOCK]
appears, set the date and time.
You can go to the setup menu by pressing the
[MENU] button while the message is
displayed.
You can set the year from 2003 to 2099. The
24-hour system is used.
1
2
• In simple mode, skip this step.
3
4
SETUP 2/3
5
6
EXIT
• The menu will disappear.
MENU
7
.
• When the new batteries are inserted in the
camera for more than 3 hours, the time and
EXIT date will be held for approximately 3 months
MENU
if the battery is removed. If the batteries
were not new, the time may not be retained
properly. If the time/date setting is lost
please reset it.
25
Press the [MENU] button.
Press 1 to make the setup menu
appear.
Press 3/4 to select [CLOCK SET],
and then press 1.
Press 3/4/2/1 to set date and time,
and then press 1.
Press 3/4 to select [M/D/Y], [D/M/Y] or
[Y/M/D].
Press the [MENU] button 2 times.
Check if the date/time setting is
displayed correctly, after turning the
camera [OFF] and [ON].