Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-FX35 Operating Instructions Manual

Panasonic lumix dmc-fx35: user guide
Table of Contents

Advertisement

Advanced (Recording pictures)
[REC] mode:

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure compensation
range each time the shutter button is pressed. You can select the picture with the desired
exposure from the 3 pictures with different exposures.
With auto bracket d1 EV
1st picture
d0 EV
1
Press 3 [È] until [AUTO BRACKET] appears, set
the compensation range of the exposure with 2/1.
When you do not use auto bracket, select [OFF] (0).
2
Press [MENU/SET] to finish.
You can also press the shutter button halfway to finish.
Note
When setting auto bracket, [
When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
The auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.
When auto bracket is set, the auto review function is activated regardless of the auto review
setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP]
menu.
The exposure may not be compensated with auto bracket depending on the brightness of the
subject.
[Œ] is set for the flash when auto bracket is set.
Burst is canceled when auto bracket is set.
44
VQT1P09
·¿
] appears on the screen.
2nd picture
j1 EV
3rd picture
i1 EV

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents