Scene Detection; The Backlight Compensation; Recording Mode - Panasonic Lumix DMC-FX35 Operating Instructions Manual

∫ When taking pictures using the flash (P38)
∫ When taking pictures using the zoom (P30)
Note
•
Be careful not to move the camera when you press the shutter button.
•
Do not cover the flash or the AF assist lamp with your fingers or other objects.
•
Do not touch the front of the lens.
When the camera identifies the optimum scene, the icon of the scene concerned is displayed in
blue for 2 seconds, after which its color changes to the usual red.
¦ >
[i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
[i-NIGHT SCENERY]
•
[ ¦ ] is set if none of the scenes are applicable, and the standard settings are set.
•
If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the scene mode has been identified as [
8 seconds.Take care not to move the camera while taking pictures.
∫ Face detection
When [ ] or [ ] is selected, the camera automatically detects a person's face, and it will
adjust the focus and exposure (P62).
Under backlight conditions, the lighting is automatically corrected so that
the brightness of the faces will be optimal.
Note
•
Due to conditions such as the ones below, a different scene may be
identified for the same subject.
–
Subject conditions: When the face is bright or dark, The size of the
subject, The distance to the subject, The contrast of the subject,
When the subject is moving, When zoom is used
–
Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken
•
To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate recording mode.
Backlight refers to when light comes from the back of a subject.
In this case, the subject will become dark so this function compensates the backlight by
brightening the whole of the picture.
Press 3.
•
When the backlight compensation function is activated, [
appears.
Press 3 again to cancel this function.

Scene detection

•
Only when [‡] is selected
•
Only when [Œ] is selected
], the shutter speed will be set to a maximum of

The Backlight Compensation

]
Basic
27
VQT1P09