NETGEAR WAX214v2 User Manual page 73

Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
For a radio, you can also disable client limits entirely, allowing an unlimited number of
clients to associate with the radio. However, if too many clients simultaneously connect
to the radio, the quality and throughput of the connection might decrease, or clients
might not be able to connect.
To manage client limits for a radio:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > Network > Wireless.
The page that displays shows the Wireless Settings section and other sections.
5. Do one of the following:
• Set client limits for a radio: Set client limits by doing the following:
a. Select the Clients Limits Enable radio button for the radio.
By default, client limits are enabled for both radios.
b. In the Client Limits field for the radio, enter a number from 1 to 64.
For each radio, the default is 64.
• Disable client limits for a radio: Disable client limits for a radio by selecting the
Clients Limits Disable radio button.
By default, client limits are enabled.
6. Click the Apply button.
A pop-up window displays.
7. Click the OK button.
Manage the WiFi Radio Settings 73 User Manual