Displaying The Time At The Travel Destination (World Time) - Panasonic Lumix DMC-FX33 Operating Instructions Manual

• The number of days that have passed
since the departure date is displayed for
about 5 seconds if this unit is turned on
etc. after setting the travel date or when
the travel date is set.
• When the travel date is set, [
appears on the lower right of the
screen. (It is not displayed if the current
date is after the return date.)
∫ Canceling the travel date
The travel date is automatically canceled if
the current date is after the return date. If
you want to cancel the travel date before
the end of the vacation, select [OFF] on the
screen shown in step
[MENU/SET] twice.
• The travel date is calculated using the
date in the clock setting and the departure
date you set. If you set [WORLD TIME]
(P53) to the travel destination, the travel
date is calculated using the date in the
clock setting and the travel destination
setting.
• The travel date setting is memorized even
if the camera is turned off.
• If you set a departure date and then take a
picture on a date before this departure
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• If you set a departure date and then
change the clock setting to the date and
time at the travel destination, [-] (minus) is
displayed in white and the day of the
vacation that you took the picture is
recorded when the travel destination date
is, for example, one day before the
departure date.
• If [TRAVEL DATE] is set to [OFF], the
number of days that have passed since
the departure date will not be recorded
even if you set the travel date or the return
date. Even if [TRAVEL DATE] is set to
[SET] after taking the pictures, which day
of the vacation you took them is not
displayed.
]
4
and then press
• Set the clock if the message [PLEASE
SET THE CLOCK] appears.
• The [TRAVEL DATE] setting is also
reflected in clipboard mode [
Displaying the Time at
the Travel Destination
(World Time)
If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P14)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1
3 Press 3/4 to select
[WORLD TIME] and then press 1.
• If you are setting the world time for the
first time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the
screen shown in step 2 in "Setting the
home area [HOME]".
∫ Setting the home area [HOME]
1 2
(Perform steps ,
Advanced (Recording pictures)
].
3
and .)
VQT1J82
.
53