Table of Contents
Advertisement
en Transportation, storage and disposal
18.1 Emergency release
Releasing the door
Requirement: The drain pump is
empty. → Page 39
ATTENTION! Escaping water may
1.
cause material damage.
Do not open the door if you can
▶
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a The door lock is released.
Insert the maintenance flap and
2.
lock it into place.
Close the maintenance flap.
3.
19 Transportation, stor-
age and disposal
19.1 Removing the appliance
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
Turn off the tap.
1.
Empty the water inlet hose.
2.
Switch off the appliance.
3.
Unplug the appliance's mains plug.
4.
54
Drain the water.
5.
→ "Cleaning the drain pump",
Page 39
Detach the hoses.
6.
Empty the dispensers.
7.
19.2 Inserting the transit
bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
Use a screwdriver to remove the 4
1.
cover caps.
Keep the cover caps.
Install the 4 transit bolts. Refer to
2.
the description
→ "Removing the transit bolts",
Page 13 for this and proceed in re-
verse order.
19.3 Using the appliance
again
For further information, see
▶
→ "Installation and connection",
Page 12 and
→ "Starting an empty washing
cycle", Page 20.
Advertisement
Table of Contents
