Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
SAN RAPHAEL Toilet ................................................K-3384T-A
Includes French Curve Elongated Toilet Seat .......K-
SAN RAPHAEL Toilet .............................................K-3384T-S
Includes CACHET Quiet-Close Toilet Seat....K-4636T-U
TM
SAN RAPHAEL Toilet .............................................K-3384T-C
Includes French Curve Quiet-Close Seat............K-4713T
SAN RAPHAEL Toilet.........................................K-3384T-SAF
Includes CACHET Quiet-Close Toilet Seat....K-4636T-U
TM
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 152mm (6").
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm (12") roughing-in
dimension.
See Fig. #1
·
Closet flange must be 305mm (12") on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #4
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2003).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight.
1033005-T01-J
please leave instructions for the
®
®
.
. The fill valve
VITREOUS CHINA SIPHON WASH ONE-PIECE TOILET
S-EB 305mm K-3384T-A/K-3384T-S/K-3384T-C/K-3384T-SAF
·
·
·
4653T-U
·
·
·
·
51mm
·
·
1)
·
·
Fig. #1
·
·
2003.
-1-
SAN RAPHAEL
INSTALLATION INSTRUCTIONS
.......................................................K-3384T-A
.......................K-4653T-U
.......................................................K-3384T-S
..........................K-4636T-U
.......................................................K-3384T-C
.....................................K-4713T
..................................................K-3384T-SAF
..........................K-4636T-U
140mm
152mm
305mm
1
4
ASME
528137
Copyright Kohler China Ltd., 2009
TM
-
305mm(
A112.19.2-
, 2009
Advertisement
Related Manuals for Kohler French Curve K-4653T-U
Summary of Contents for Kohler French Curve K-4653T-U
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
Reference Value Unit: mm FRONT OF BOWL OF OUTLET DN10/15 SUPPLY Kohler reserves the right to change marked dimensions without prior notice. Fig.#1 INSTALLATION TO REMOVE EXISTING TOILET Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and bowl. - Page 3 The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any Fig.#3 damage caused by installation with the use of cement.
- Page 4 Assemble the bolt cap bases, washer, and nuts on the exposed T-bolts. Bolt Cap* Handtighten the nuts, then tighten them an additional 1/2-turn. CAUTION: Risk of personal Washer injury or product damage. overtightening may cause Bolt Cap Base* breakage or chipping of the vitreous china.
- Page 5 FILL FLOAT WITH BALLAST Adjust the float by the cross-shaped thread and sliding it up or down on the float rod until the water level is at the marked water line. Test flush the toilet. Check all connections for leakage for several days.
- Page 6 1033005-T01-J...
-
Page 7: Consumer Responsibilities
(calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage. Kohler Company shall not be responsible or liable for any damage to these tank fittings caused by the use of cleaners containing chlorine (calcium hypochlorite).