Table of Contents
Advertisement
Your pellet stove has been safety tested and listed to ASTM E1509-12 (2017) and ULC-S627-00. This manual describes
the installation and operation of the pellet stove. This heater meets the 2020 U.S. Environmental Protection Agency's
emission limits for wood-heaters sold after May 15, 2020. Under specific EPA test conditions burning wood pellet fuel
this heater has been shown to deliver heat at a rate of 32,591 to 13,640 Btu/hr. This heater achieved a particulate
emissions rate of 1.5 g/hr when tested to method ASTM E 2779 / EPA Method 28R and 76% efficiency.
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Flue Size
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Overall: Height x Width X Depth
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
Note: Register your product online at
www.usstove.com
app today. This app is available only
on the App Store for iPhone and iPad.
Search US Stove. Save your receipt with
your records for any claims.
© 2022 United States Stove Company
2.1-5 lbs/hr (0.97 -
2.26 kg/hr)
80 hrs.
170lbs. (77kg)
3" or 4"
110-120 Volts AC, 60 HZ, 3.0 Amps
175 (approx.)
425 (approx.)
40" (1003mm) X 24" (610mm) X 30" (762mm)
WARNING:
or download the free
2
INTRODUCTION
* Pellet size may effect the actual rate of fuel feed
and burn times. Fuel feed rates may vary by as much
as 20%. Use PFI listed fuel for best results.
For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
customerservice@usstove.com
Advertisement
Table of Contents
