Timer Button; Display Window - Dimplex GDDEKD9W Instruction Manual

TIMER BUTTON

1. IN OPERATION TIMER: while the dehumidifier is operating, press TIMER button to set
the number of hours you want the dehumidifier to continue operation. While pressing the
button, the LED display will show the number of hours you set (between 0 and 24 in a
cycle). The TIMER Indicator will light up at the same time.
When the set time has been reached, the machine will turn off automatically.
2. DELAYED START TIMER: while the dehumidifier is turned off/in standby mode, press the
TIMER button to select the number of hours you want the dehumidify to countdown until
it turns on. For example, if you select the timer to '2', the unit will turn on automatically
after 2 hours and enter into the last used mode.
• AIR CLEAN BUTTON: By pressing this button, the unit will work in FAN (ventilation)
only, no heat. AIR CLEAN indicator light will turn on at the same time. The fan speed is
adjustable in this mode.

• DISPLAY WINDOW

This can display the:
– room temperature (0~50ºC).
– room humidity (35~95% humidity).
– set humidity, while pressing the HUMIDITY button.
– set time while pressing the TIMER. After 8 seconds, the display returns to room humidity.
• ON INDICATOR (heat operation indicator)
– lights up in GREEN as the heat element is working.
– lights up in RED and blinks if the unit is tipped over.
• WATER FULL INDICATOR: The light turns red and blinks when the water tank is full or if
the tank is not in the correct position.
• HUMIDITY INDICATOR IN THE FRONT: This unit has a special HUMIDITY INDICATOR
in the front, enabling the user to tell the ambient humidity level immediately. It will light up
in 3 different colors:
BLUE LIGHT – ROOM HUMIDITY > 70%
GREEN LIGHT – ROOM HUMIDITY 50~70%
RED LIGHT – ROOM HUMIDITY < 50%
• In SLEEP mode, this indicator will not work.
– 9 –