Vfo A / Vfo B; Of Vfo A / Vfo B Frequencies; Receive Frequency; Transmit Frequency - Yaesu ADMS-15 Instruction Manual

VFO A / VFO B

Edit the VFO A / VFO B configurations for each band on this page template.
About the setting items of VFO A / VFO B frequencies

• Receive Frequency

Enter the VFO frequencies for each band. The FTM-200DR/DE default Frequencies are pre-entered into
the ADMS-15 standard template.
A frequency that is out of the transceiver's range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.

• Transmit Frequency

The transmit frequency display is grayed out, and it will be set automatically, in accordance with the re-
ceive, and the offset frequencies.

• Offset Frequency

When a transmit frequency is not entered, transmission will be performed at a frequency obtained by
adding/subtracting the offset frequency to/from the receive frequency.
26