palmOne Palm VersaMail User Manual page 37

CHAPTER 3
Tip
You should manually
retrieve any messages
using Get or Get & Send
after setting up a
scheduled Auto Sync.
Then, only new messages
are retrieved during Auto
Sync.
®
VersaMail application
Getting and Reading Messages
2
Set schedule options:
Interval Select the Every pick list and select the time interval, from 5 minutes
to 12 hours. Note that if you set a more frequent interval, you may need to
recharge your device's battery more often.
Start/End Time Select the Start and End Time boxes, and then select the hour,
the minute, and AM or PM to enter the time for the first and last Auto Sync to
take place. Select OK.
Days Select the days you want the schedule to be active. You can choose any
number of days, but you can set up only one schedule for each email account.
3
Select OK.
4
[ & ] OPTIONAL
Done
Auto Sync notifications
The Auto Sync feature provides two types of notifications during and after it gets messages:
Alerts You can choose to have your device alert you with a beep or alert sound, or by vibrating,
when a new message arrives in your account.
Reminders screen If Auto Sync discovers and downloads new messages for an email account, a
notification appears on the Reminders screen, telling you the account name and the number of
new messages. If Auto Sync is scheduled for more than one account, a separate notification
appears for each account.
Select Get or Get & Send.
33