Table of Contents
Advertisement
8� Plug the power cord into the monitor, and then plug the monitor power cord and computer
cord into a grounded power outlet�
Note:
A certified power supply cord has to be used with this equipment� The relevant national
(regional) installation and/or equipment regulations shall be considered� The certified
power cord used should not be lighter than the ordinary PVC flexible cord specified by
IEC 60227 (marking H05VV-F 3G 0�75mm2 or H05VVH2-F2 3G 0�75mm2)� According to
IEC 60245 (marking H05RR-F 3G 0�75mm2), synthetic rubber cord should be used�
9� Connect the cables with cable clip�
Chapter 1� Getting started 1-8
Advertisement
Table of Contents
