JVC AV-29ED5BN Instruction Manual page 10

In an AV mode, you can change only the “MODE” or “CO-
LOUR SYSTEM” setting.
• If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
• Press “ “ or “ ” button to select “TUNING” item.
• Press “ ” or “ ” button to enter “TUNING” menu.
UVIDI BÃÃÃÃÃÃ!!ÃÃÃ8!
Q…‚t…h€€r
Trh…pu
T‡hqh…q
8‚y‚ˆ…Æ’†‡r€
7hq
1. Press “ “ or “
menu. Then press “ ” or “ ” button to change the setting.
2. After all settings of a channel are completed, press “
or “ ” button to select “Programme” item. Then press
“ ” or “ ” button to select a programme number which you
want to store the setting.
3. Press “ “ or “
press “ ” or “ ” button to store the setting.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
UWÃGvx
9‚y‚hqÃÃUWÃ
8
QD8 8hpry
4. If you do not have a T-V LINK compatible VCR, press
“PICTURE” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure “Down-
loading the data to VCR” on page 21 to transmit the
Programme table data to the VCR.
Search:
You can search a channel manually.
• Select "Search" item. Then press “ ” or “ ” button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
• Searching stops when the TV finds a channel. Then the
channel is displayed.
• Press “ ” or “ ” button repeatedly until the channel you want
appears.
” to select an item in the “TUNING”
” button to select “Store” item. Then
ÃÃW8SÃArh‡ˆ…r
Ã
‚‡vˆr Ã
• When you cannot search a channel you want, select the
"Standard" item and select other broadcasting system.
Then start searching again.
Standard:
• If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
• Select "Standard" item. Then press “ ” or “ ” button to se-
lect a broadcasting system.
Colour system:
• If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
• Select "Colour system" item. Then press “ ” or “ ” button
to select a colour system.
Band, Channel:
• If you know a channel number, you can find it directly by
entering the channel number.
• Select the "Band" item. Then press “ ” or “ ” button to se-
lect the band (C or S) where the channel you want is lo-
cated.
“
• Select the “Channel” item. Then press “ ” or “ ” button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your “COUNTRY” and “Standard” settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
• Select "Fine tuning" item. Then press “ ” or “ ” button to
fine -tune the channel.
Name:
You can store the channel name or change it.
• Select “Name” item. Then press “ ” or “ ” button to display
a cursor.
• Press “ ” or “
press “ ” or “ ” button to move the cursor.
• After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
• When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Decoder (EXT-2):
You can only set “Decoder (EXT-2)” item to “ON” if you have
a decoder connected to a T-V LINK compatible VCR, which
ENGLISH - 25 -
” button to select a character and