Palm Treo 270 User Manual page 207

4. Enter the name of the profile and click OK.
5. Close the Users dialog box.
6. From the User pop-up menu, choose the profile name and create the data for the profile (e.g.,
company phone list, etc.).
To use a profile for the first-time HotSync operation:
1. Connect the new communicator to the HotSync cable.
2. Press the HotSync button on the cable.
3. Select the profile that you want to load on the communicator, and click OK.
4. Click Yes to transfer all the profile data to the communicator.
The next time you perform a HotSync operation, Palm Desktop software prompts you to assign
a user name to the communicator.
Chapter 8 Page 207