Page 2
Textteil beachten! DE ..8 Follow written instructions! GB ..15 L´ Suivre les instructions ci-après ! FR ..21 Tekstpassage in acht nemen! NL ..28 Seguire attentamente le istruzioni! IT .
14. Betriebsstörungen Note: The eNet version can be integrated into an eNet wireless network. Störung Ursache Abhilfe 1. About this document Package contents (Fig. 3.1) Sensor ohne Spannung n Sicherung defekt, nicht einge- n neue Sicherung, Netzschalter Product dimensions (Fig. 3.2) schaltet, Leitung unterbrochen einschalten, Leitung mit Span- Please read carefully and keep in a safe place.
Page 6
Note: The system cannot be switched OFF, it is Starting up eNet (eNet version only) Pulse mode: Manual override only possible to select operation at setting I or II. The sensIQ eNet can be integrated into an eNet If the controller is set to " ", the unit is in pulse Activate manual override: system in various ways.
Service Hotline for proper working order as well for testing conditions may a ect the way the motion detector retailer or contact us at STEINEL (UK) Limited, 01733 366700. the detection zone. Irrespective of light works.
14. Troubleshooting fonctionnement peuvent être également e ectués par le biais de la télécommande RC9 ou Smart Malfunction Cause Remedy Remote, ➜ « 8. Accessoires ». 1. À propos de ce document No power at the sensor n Fuse faulty, not switched ON, n Replace fuse, turn ON power Remarque : La variante eNet est conçue pour une break in wiring...