Sony PSP go Instruction Manual page 50

Notice
Other than when disposing of the system, never remove the
screws and never remove the battery from the system.
Unauthorized modification of the system will void your
warranty. For warranty terms and conditions, please refer to
official websites (
1
Slide up and hold the POWER/HOLD switch
for more than three seconds to turn off the
system.
2
Disconnect any cables that are connected to
the system.
3
Using a crosshead screwdriver, remove the
screws (6 places).
0
Before disposing of or transferring the PSP
page 45).
®
4
Remove the casing (2 pieces).
5
Remove the battery.

Remove the warranty seal.

Remove the battery, and then disconnect it from the
connector.
Caution
Do not handle damaged or leaking Lithium-Ion batteries.
Proper disposal of the system after removing the
battery
The system and its parts are made from metal and plastic
materials. When disposing of the system, follow local
regulations for the proper disposal of such materials.
system
Warranty seal
Battery
Connector