SMA Solar Technology AG
6.2 Display Messages During the Startup Phase
• After commissioning, the inverter displays the
device type in the startup phase.
• After 5 seconds or when you tap again on the
enclosure lid, the firmware version of the internal
processors is displayed by the inverter.
• After a further 5 seconds or when you tap again,
the configured country standard is displayed by the
inverter (example: "VDE-AR-N4105-MP").
Showing the display messages again (valid as of firmware version 2.15)
If you want to view the display messages of the startup phase again while in normal
operation, tap the enclosure lid twice in quick succession.
Installation Manual
SMC xxx
Wrxxx
SMC46-60A-IA-IEN120471
Commissioning
49