Long range protection + cordless convenience.
cordless long range
radar laser detector (2 pages)
Summary of Contents for Escort SOLO S4
Page 1
Quick Reference Long Range Protection + Cordless Convenience Cordless Long Range Radar Laser Detector Cordless Convenience Long Range Radar/Laser Detection Open ➜ OLED OLED Display • • •...
Page 2
• Brilliant high-resolution OLED display The SOLO S4 includes full X, K, SuperWide Ka, and Safety Warning System radar capability, • Advanced EZ-Programming lets you front and rear laser detection, digital signal...
2 To adjust SOLO S4 on your windshield, use view of the road ahead. the EasyMount adjustment button located on the top of the SOLO S4, and slide SOLO S4 forward or backward to obtain a level horizontal position. When installed and adjusted properly, the back top edge of the SOLO S4 should rest solidly against your windshield.
SOLO S4’s right side. Plug the lighter plug adapter into your vehicle’s lighter socket or accessory socket. Press the PWR button to turn SOLO S4 on. Press and hold the PWR button to turn SOLO The SmartCord allows you to operate the S4 off.
Page 5
Graphic OLED Display EZ-Programming During an alert, the display will turn on and SOLO S4 is ready to go, just plug it in and indicate radar band, and a precise bar-graph turn it on. If you prefer, you can also easily of signal strength.
Page 6
1 To enter Program Mode, press and hold of the VOL buttons and SEN button down both PGM buttons for 2 seconds. The unit for 2 seconds. SOLO S4 will beep twice and will beep twice, and will display the word display Program.
Pilot +.> Symbol, with scanning dot Pilot +> Scanning symbol Auto Power aPwr Motn Uses motion to turn SOLO S4 off aPwr Time Uses time to turn SOLO S4 off aPwr Off Turn SOLO S4 on and off manually Power-On Sequence...
Page 8
800.433.3487 acknowledging the reset. EscortRadar.com Service Procedure If your SOLO S4 ever needs service, call us at ESCORT Inc. 1-800-543-1608. We may be able to solve 5440 West Chester Road your problem over the phone. If the problem...