Advertisement
LENS
This camera can accommodate DC voltage drive auto-iris lens. VIDEO signal controlled lens is not available.
ELECTRONIC CONNECTIONS
Table.1 shows wiring scheme for the 4pin Auto iris connector.
Lens Connector
2
1
4
3
(View from wiring side of plug)
MECHANICAL CONNECTION
Before mounting any lens onto this camera, check that the rear lens dimensions do not exceed the following
maximum length, otherwise CCD imager could be damaged.
The camera is shipped, ready to accept "CS" type lens. If standard "C"-mount lens are to be used, it is necessary
to install the "C-mount Adapter" ring first, then the lens.
En-7
Auto-iris Lens
Fig. 2
"X"
CS = 0.2" (6 mm)
C = 0.4" (10 mm)
Table 1
DC VOLTAGE DRIVE
Connector
AUTO-IRIS LENS
Pin No.
1
CONT. ( )
2
CONT. (+)
3
DRIVE (+)
4
DRIVE ( )
LENS
"X"
Fig.3
Advertisement
