Advertisement
IMPORTANT SAFEGUARDS
1. Read Instructions–All the safety and operating instructions should be read before the camera is
operated.
2. Retain Instructions–The safety and operating instructions should be retained for future reference.
3. Heed Warnings–All warnings on the camera and in the operating instructions should be adhered
to.
4. Follow Instructions–All operating and use instructions should be followed.
5. Cleaning–Unplug the power unit from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments–Do not use attachments not recommended by your appliance dealer, as they may
cause hazards.
7. Water and Moisture–Do not use the camera in any location in which it may be exposed to water
or moisture.
8. Accessories–Do not place the camera on an unstable cart, stand, tripod, bracket, or table. The
camera may fall, causing serious injury to a child or adult, and serious damage to the camera. Use
only with mounting accessories recommended by your appliance dealer or sold with the camera.
Any mounting of the camera should follow your appliance dealer's instructions.
9. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination
to over turn.
10. Ventilation–The camera should never be placed near or over a radiator or heat register.
The camera should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or your appliance dealer's instructions have been adhered to.
11. Power Sources–The camera should be operated only from the type of power source indicated
on the rating plate. If you are not sure of the type of power supply to your installation site, consult
your appliance dealer or local power company. For cameras intended to operate from battery power,
or other sources, refer to the operating instructions.
12. Power-Cord Protection–Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the camera.
13. Lightning–For added protection for the cam era during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
cable system. This will prevent damage to the camera due to lightning and power-line surges.
En-3
PORTABLE CART WARNING
(Symbol provided by RETAC)
S3125A
Advertisement
