Remington PG6110 - All-In-One Lithium Grooming Kit Manual

Table of Contents

Contents

1 Product Features
2 Before Using
3 How to Use
4 Cleaning, Care and Maintenance
5 Documents / Resources
- 5.1 Download manual

Product Features

Product Features - Part 1
Product Features - Part 2

Full-Size Trimmer
Groomer Body
On/Off Switch
Beard and Stubble Combs: 3mm, 6mm, 9mm
Arc Detail Trimmer
Nose, Ear, and Eyebrow Trimmer
10-Length Adjustable Comb
Adaptor (not shown)
Pouch (not shown)

Before Using

Before using your Personal Groomer for the first time, charge the unit for 4 hours for optimal performance:

Ensure the product is turned off.
Connect the power adaptor cord to the product. Plug into electrical outlet.

How to Use

What Attachments to Use

Note: this product is for cordless use only.

Switch the product on by sliding the On/Off switch upward.

TO ATTACH AND REMOVE THE TRIMMING ATTACHMENTS

Note: Always ensure the groomer is switched off before changing any attachments.

To attach place the desired trimming head on top of the groomer and rotate clockwise to lock into place.
To remove rotate the trimmer head counter-clockwise until it unlocks and then lift off the groomer.

ATTACHING AND REMOVING FIXED GUIDE COMBS ON THE WIDE TRIMMER BLADE

To Attach

With the trimmer blade facing away from you, hook front of comb onto blade teeth and pivot back end down until it clicks into position.

To Remove

With the trimmer blade facing away from you, carefully push the tab on the back of the guide comb upwards and away from the trimmer blade.

ATTACHING AND REMOVING ADJUSTABLE COMB ON THE WIDE TRIMMER BLADE

To attach line up the comb rails and slot on the groomer until firmly secured. Pressing the adjustment button on the back of the comb will alter the cutting length increment, this is indicated on the comb.
To remove press and hold the adjustment button and push the comb up and off the groomer.

BEFORE YOU BEGIN

Comb facial hair with a fine comb before you start trimming.
Hairs should be dry and without any waxes or lotions before using the groomer.

TO THIN AND TAPER THE BEARD/MOUSTACHE

Attach the wide trimmer blade.
Place either the adjustable comb or a fixed comb on the trimmer blade, select the desired length and switch on.
Start trimming under the chin, following the jawbone line. Work toward the ear and upper beard line using an upward motion.

TO TRIM EDGE OF BEARD OR MOUSTACHE

Attach the trimmer blade.
Hold the groomer with the cutting blade facing you.
Start with edge of beard/moustache line, and with the cutting blades resting lightly against your skin, use slow movements to create a beard/moustache line.

TO TRIM SIDEBURNS

Hold the groomer with the cutting blade facing you.
Select the desired length on the adjustable comb or select the desired guide combs.
Use light pressure and well-controlled movements to trim hair.

TRIMMING THE NAPE OF YOUR NECK

Attach the trimmer blade.
Use your fingers to lift the hair at the base of your head up off the neck. Your index finger should be covering the roots of the hairs you are lifting to prevent accidental removal by trimmer.
Using your other hand, hold the trimmer to the base of your neck with the cutting unit facing up, and move the trimmer up the length of the neck until it touches your finger covering the hair roots at the base of your head.
Be sure to move the unit slowly when performing this operation and to keep the hair roots at the base of your head out of the way of the trimmer.

TO REMOVE HAIR FROM NOSE AND EAR

Attach the nose, ear, eyebrow attachment.
Insert the groomer's cutting unit gently into the nostril or ear.
Gently move the groomer in and out of the nostril or ear.
Avoid inserting the cutting unit more than 6mm into your nostril.

TO REMOVE HAIR FROM EYEBROWS

Attach the nose, ear, eyebrow attachment.
Gently guide the cutting unit to stray, unwanted hairs along the eyebrow line or protruding from the eyebrow itself.
To remove the hairs completely lower onto the skin and move over desired area.
Use short, well-controlled movements.

USING THE DETAIL ATTACHMENT

Hold the groomer with the cutting blade facing you.
Rest cutting blades lightly on the skin.
Use for more precise trimming of stray hairs or smaller areas.

TIPS FOR BEST RESULTS

Comb your hair in the direction that it grows so that the hairs are at their maximum height and facing in the same direction.
Since all hairs do not grow in the same direction, you may want to try different trimming positions (i.e. upwards, downwards or across) for better results.

Cleaning, Care and Maintenance

NOTE: Always clean trimmer attachments regularly to ensure maximum performance and a proper operating life.

DO NOT RINSE TRIMMER HANDLE.

CLEANING ATTACHMENTS WITH WATER

Remove attachment.
Rinse ONLY the attachment under warm running water. Do NOT use hot water as this might cause damage.

OILING BLADES AND CAUTIONS

Rinsing attachments under water (above) requires lubricating the cutting blades 1x monthly. Using only light-grade oils (e.g. sewing machine oil), simply spread 1–2 drops lightly over cutters. Wipe away all excess.