Kia Sportage 2023 Owner's Manual page 174

Features of your vehicle
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con-
ditions.
Detecting sensor
Front view camera
ONQ5051040N
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
僅 For more details on the precautions of
the front view camera, refer to "For-
ward Collision-Avoidance Assist (FCA)
(Front Camera Only) (if equipped)" on
page 5-52 and "Forward Collision-
Avoidance Assist (FCA) (Sensor
Fusion) (if equipped)" on page 5-62
there should be some direction after
to.
High Beam Assist setting
ONQ5031145L
4 96
ONQ5041294L
A: Vehicle Settings
1 Lights
2 High Beam Assist
With the ENGINE START/STOP button in
the ON position, select 'Lights → High
Beam Assist' from the Settings menu to
turn on High Beam Assist and deselect
to turn off the function.
WARNING
For your safety, adjust your high beam
settings only after parking the vehicle at
a safe location.
High Beam Assist operation
Display and control
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce-
dure below.
- Place the headlamp switch in the
AUTO position and push the head-
lamp lever towards the instrument
cluster. The High Beam Assist (
indicator light will appear on the
cluster and the function will be
enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will not
turn on.
Lighting
)