Kia Sportage 2023 Owner's Manual page 133

Hide thumbs Also See for Sportage 2023:
Table of Contents

Advertisement

Features of your vehicle
3. Erasing HomeLink씾 Buttons
1) Erasing and Reprogramming a
Single HomeLink씾 Button:
1. Press and hold the desired HomeLink
button you want to re-program. DO
NOT release the button.
2. The HomeLink indicator light (7) will
begin illuminate solid green. Release
the button as soon as the HomeLink
indicator light (7) begins to flash
orange, usually about 20 seconds.
3. Proceed with the steps in the "Pro-
gramming a New HomeLink Button"
section.
NOTICE
If you do not complete the re-program-
ming of a new device to the button, it will
revert to the previously stored program-
ming
2) The following instructions will
erase ALL HomeLink씾 program-
ming from ALL buttons:
OCV041609N_2
1. Press and hold the buttons (1) and (3)
simultaneously
2. The HomeLink indicator light (7) will
illuminate solid Orange for about 10
seconds
3. Release the buttons once the Home-
Link indicator light (7) changes to
Green and flashes rapidly
4. Now all three HomeLink buttons (1),
(2) and (3) are cleared of any pro-
gramming
Information
HomeLink and the HomeLink House
logo are registered trademarks of Gen-
tex Corporation.
The myQ logo is a registered trademark
of The Chamberlain Group, Inc
FCC (USA) and ISED (Canada)
This device complies with FCC rules part
15 and Innovation, Science, and Eco-
nomic Development Canada RSS-210.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference that may
be received including interference that
may cause undesired operation. WARN-
ING: The transmitter has been tested
and complies with FCC and ISED rules.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's author-
ity to operate the device.
This equipment complies with FCC and
ISED radiation exposure limits set forth
for an uncontrolled environment. End
Users must follow the specific operating
instructions for satisfying RF exposure
compliance. This transmitter must be at
least 20 cm from the user and must not
be co-located or operating in conjunc-
tion with any other antenna or transmit-
ter.
Mirrors
4
4
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents