Image Stabilizer - Canon RF 24-50mm F4.5-6.3 IS STM Instructions Manual

5. Image Stabilizer

This function provides image stabilization
appropriate for shooting conditions (such as
shooting still subjects and panning shots).
Set the image stabilizer switch to ON when you
want to use the Image Stabilizer.
Set the image stabilizer switch to OFF when
z
you are not going to use the Image Stabilizer.
The Image Stabilizer cannot compensate for a
z
blurred shot caused by a subject that moved.
The Image Stabilizer may not be fully effective if
z
you shoot from a violently shaking vehicle or other
transportation.
When using a tripod, it is recommended that you
z
set the Image Stabilizer to OFF.
Even with a monopod, the Image Stabilizer will
z
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.
The Image Stabilizer will work in combination with
z
cameras with in-body Image Stabilizer.
ENG-11