Oregon Scientific Monza FAW-101 User Manual page 15

VIEW MIN / MAX / CURRENT MEASUREMENTS
Press MEMORY.
CLEAR MIN / MAX MEASUREMENTS
Press and hold MEMORY for 2 seconds until a beep
sounds.
SELECT REMOTE UNIT CHANNEL
Press CHANNEL to switch between
1, 2, 3, or indoor. Or, press and hold for 2 seconds
to enter auto scan mode. If you select "Auto", the
channel will change every 3 seconds.Press
CHANNEL or MEMORY again to deactivate this
Auto function.
SENSOR SEARCHING
Simultaneously press CHANNEL and MEMORY to
manually activate channel searching. The search
icon will blink until the remote signal is found, or the
search period times out.
Searching
CHANNEL
15
Strong signal No signal