Table of Contents
Advertisement
SELECT LAN GUAGE
Press O K . The Language Set display appears on the
3
front display panel and/or on the screen.
If you are referring to the front display panel
Press % fi to select your language code.
Language Code
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
CASTELLANO : 05
(Ex.) DEUTSCH is selected for SUISSE
International telephone
country code
If you are referring to
the on-screen display
Press % fi to move the
highlight bar (pointer) to
the language of your
choice.
PERFO RM AUTO SET UP
Press O K .
4
If you are referring to the front display panel
Press % fi to select "Auto" and press O K or
If you are referring to the on-screen display
Press % fi to move the
highlight bar (pointer) to
"AUTO SET" and press O K
or
.
#
"Auto" blinks on the display panel; do NOT press
any button on the recorder or remote control until
the display panel shows either the display as
illustrated on page 7 or "– –:– –".
● If you are using the on-
screen display, the
AUTO SET screen will
appear. As Auto Set Up
progresses, the "
mark on the screen
moves from left to
right.
● If "– –:– –" appears on the display panel, refer to
page 7.
Downloaded from:
https://www.usersmanualguide.com/
: 01
NEDERLANDS : 06
: 02
SVENSKA
: 07
: 03
NORSK
: 08
: 04
SUOMI
: 09
DANSK
: 10
Language code
DANSK
SUOMI
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
[5 ∞ ] =
[MENU] : ENDE
(Ex.) DEUTSCH is selected
.
#
AUTO SET
T-V LINK
[5 ∞ ] =
[MENU] : EXIT
AUTO SET
PLEASE WAIT
"
+
+
0
[MENU] : EXIT
Beginning
N O TES:
● Auto channel set function takes place first; it assigns automati-
cally all receivable stations in your area.
● Auto clock set function sets the clock automatically by
reading the clock setting data from a station transmitting a
PDC signal while auto channel set is being performed.
● During auto channel set, the recorder recognizes each station
name of the detected stations and stores them in the
recorder's memory, then automatically sets S
assigned Guide Program number for those stations according
to the broadcast area.
● In the area where no TV station transmits a PDC signal, the
recorder can perform neither auto clock set nor auto Guide
Program number set.
● If there is a power cut, or if you press
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1 .
● Auto clock may not function properly depending on the
reception condition.
+
End
5
EN
V
HOW
IEW
or M EN U while Auto
Advertisement
Table of Contents
