Table of Contents
Advertisement
22
EN
N U M BER
M EN U
N O TES:
● It is possible that the Controller will not work with all types of
DBS receiver.
● If your DBS receiver doesn't respond to the code, you can't
use the Controller to change satellite channels. In this case,
make sure to leave the DBS receiver turned on and tuned to
the proper channel before the scheduled start of timer
recording.
● The VCR can only change the satellite channel through the
Controller during timer recording.
● If your DBS receiver is one that can't be operated with a
remote control (because it has no remote sensor), you can't
use the Controller to change its channels. Make sure to leave
the DBS receiver turned on and tuned to the proper channel
before the scheduled start of timer recording.
For customers in U .S.A.: If you are unable to set the Control-
●
ler, please contact J VC toll free at 1-800-252-5722.
Downloaded from:
https://www.usersmanualguide.com/
q
1
2
3
4
5
6
7
8
9
0
CH
O K
TIM E SCAN
IN ITIAL SETTIN GS (cont.)
Set DBS Receiver Bra nd
TURN O N DBS RECEIVER
Select a channel other than channel 55, 100 or 205 on
1
your DBS receiver.
ACCESS DBS RECEIVER
BRAN D SET SCREEN
At the Custom Set screen,
2
press CH 5 ∞ or TIM E
5 ∞ to move the
SCAN
highlight bar (arrow) to
" DBS RECEIVER BRAND
SET" , then press O K.
EN TER DBS RECEIVER
BRAN D
Press the appropriate
3
N U M BER keys to enter the
DBS Receiver Code from
the following list, then
press O K .
The unit is pre-set to code
80 (RCA) when shipped.
BRAND
RCA (DSS)
SONY (DSS)
PRIMESTAR
ECHOSTAR
● If the DBS receiver's channel changes as follows,
setting is complete:
RCA or SONY [ 205
PRIMESTAR [ 55
ECHOSTAR [ 100
● After
O K is pressed, the program currently received
through the DBS receiver will appear for about 10
seconds.
RETURN TO N O RMAL
SCREEN
Press M EN U as many times as necessary.
4
CUSTOM SET
OVERRIDE
AUTO CLOCK SET
LANGUAGE SELECT
VCR PLUS+ SET-UP
DBS RECEIVER OUTPUT
=DBS RECEIVER BRAND SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
DBS RECEIVER BRAND SET
80
PRESS NUMBER KEY (0-9)
THEN (OK)
PRESS (MENU) TO END
CODE
80
81
90
91
Advertisement
Table of Contents
