Table of Contents
Advertisement
Projector Features
Feature
Effect
Adjustable
Rotates 180° to cast
Projector
image onto any wall
FOCUS
Focuses image
Knob (A11)
[
]
Rotates image on a
IMAGE
given surface to
ROTATION
maintain an upright
knob (A10)
position
180°
Horizontally flips
ROTATION
an image on a given
button (A12)
surface to maintain
an upright position
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your BAR338PA comes with an AC power adapter. For continuous
projection the AC power adapter must be used. To install the
adapter:
Instructions
Adjust by pivoting forwards
or backwards the projector,
so that the projection lens
is pointed in the appropriate
direction
Rotate knob forwards or
backwards until the image
clarity is optimized
Turns an image to maintain
an upright position
Flips an image to maintain
an upright position
1. Unscrew the cover at the bottom of the stand.
2. Plug the adapter into the adapter socket.
3. Connect the power adapter to a wall socket.
4. Slide [PROJECTION ON] to ON.
To turn off the projector, slide the [PROJECTION ON] back. Note
that this switch can only be used with the power adapter connected.
For momentarily projection, use [SNOOZE/LIGHT].
HOW TO USE THE BACKLIGHT
Press the [SNOOZE/LIGHT] button once. The backlight will light
up on the LCD Display and around the key panel for five seconds.
Projection will also be on for five seconds.
DISPLAY MODES
In normal display mode, the current time, including seconds, will
be displayed. To display weekday, press [CLOCK] once. To switch
back to normal time display, press [CLOCK] once.
5
Hide quick links:
Advertisement
Table of Contents
