Table of Contents
Advertisement
8. AP Discovery through PLANET NMS Controller
(NMS-500/NMS-1000V)
The WDAP-C7210E is the Smart AP series which can be centrally managed by
PLANET NMS Controller.
Follow the steps below to discover the managed AP through PLANET NMS
controller (NMS-500/NMS-1000V). Please ensure each managed AP uses
a different static IP in the same subnet before physically connecting to the
managed network.
*** Please regularly check PLANET website for the latest compatible list of the
controller/managed APs in each firmware version.
Step 1: Launch the Web browser (Google Chrome is recommended.) and
enter the default IP address https://192.168.1.100:8888 of the NMS
controller. Then, enter the default username and password "admin"
to log on to the system.
*The secure login with SSL (HTTPS) prefix is required.
Step 2: Go to the "Domain" page to discover and add the managed AP
to the device list. Then, you can go to the "AP Control-> AP
Management" page to configure pre-defined profiles to the managed
AP without logging on to the AP's web page.
For information about further configuration of Managed AP by using PLANET
Smart AP Control, refer to the configuration guide of the NMS controller (NMS-
500/NMS-1000V).
10
Advertisement
Table of Contents
