Hardware Introduction; Front Panel; Led Indicators - Planet Networking & Communication MGS-910X User Manual

2. Hardware Introduction

2.1 Front Panel

The Front Panel of the Multigigabit Ethernet Switch consists of 8 auto-sensing
10/100/1000/2500Mbps Ethernet RJ45 ports and 1 10GBASE-X SFP+ slot. The
LED Indicators are also located on the front panel of the Multigigabit Ethernet
Switch.
 MGS-910X
8-Port 10/100/1000/2500T + 1-Port 10G SFP+
Multigigabit Ethernet Switch
MGS-910X
 MGS-910XP
8-Port 10/100/1000/2500T 802.3at PoE ++ 1-Port 10G SFP+
Multigigabit Ethernet Switch
MGS-910XP

2.2 LED Indicators

 System
LED Color
PWR Green
 Per 10/100/1000/2500BASE-T Port
LED Color
10/100/1000
Amber
LNK/ACT
2500
Green
LNK/ACT
4
2.5G LNK/ACT
10/100/1000 LNK/ACT 2 4 6 8
PWR 10G
1 3 5 7 9
Standard
VLAN
2.5G LNK/ACT
2 4 6 8
10/100/1000 LNK/ACT
PoE
PoE-in-Use
10G
PWR
1 3 5 7 9
Standard
VLAN
Figure 1: Front Panel
Lights to indicate that the Switch has power.
Lights to indicate the link through that port is
established successfully at 10/100/1000Mbps.
Blinks to indicate that the Switch is actively sending
or receiving data over that port.
Lights to indicate the link through that port is
established successfully at 2500Mbps.
Blinks to indicate that the Switch is actively sending
or receiving data over that port.
2 4 6 8
LNK/ACT
1 3 5 7
2 4 6 8
LNK/ACT
1 3 5 7
Function
Function
10G SFP+
9
10G SFP+
9